IsoMove

The ISO-Move is an advanced isokinetic machine that tests and trains the quadriceps and hamstrings strength. The Iso-Move helps a patient regain mobility and muscle strength around the knee, as well as prevent any knee related deficit.It is equipped by an Engine torque of 450 N/m and electronic control system with a sample frequency of 1250 Hz. Iso-Move is equipped with a linear guide of axial cushions so as to eliminate any friction.Maximum percentage of error during the isokinetic assessment is: 1%.

Interested? Get in touch today!

Perfect Movement Control

Two fundamental elements of the ISOMOVE Isokinetic system to guarantee perfect movement control:
• a high-performance torque motor
• an electronic system of real-time control.
ISOMOVE is equipped with both elements. The torque motor is able to deliver 450 N/m and electronically control the system with sampling frequency at 1250 Hz.
The balance of these two elements allows a smooth, safe, linear and precise movement. 

Your flexible exercise with ISOMOVE: the Flex Control

ISOMOVE exploits isokinetic and simultaneously simulates the elastic phase with the exclusive Flex Control function.
In practice, exercise with the rubber bands is very widespread, and many clinical studies have proven qualities such as fluidity, continuity and a concentric-eccentric natural movement.
ISOMOVE demonstrates its full potential with unprecedented electronic control that simulates an elastic system thanks to the exclusive Flex Control software.

ISOMove: A precise system for knee rehabilitation

In the development of the ISOMOVE system, the TecnoBody Research and Development Center has created a mechanic of extreme precision that guarantees the transmission of movement as accurate as possible. Also at the tibial contact point, critical for the high energy transfer, ISOMOVE is equipped with a linear guide with axial bearings to eliminate any friction. The result is a perfect movement, perceived as fluid and natural by the patient. The ISOMOVE system is equipped with a horizontal adjustment of the seat, inclination of the backrest and the fulcrum of rotation that together align the center of rotation of the knee with that of the system. ISOMOVE is the ideal physiotherapy machine for a correct flexion-extension of the knee. 

Specifications

General

• Touch screen monitor 20” widescreen:Resolution: 1600 x 900 pixels
• Adjustable seat height, depth and backrest angle
• Scrolling dynamic measurement arm
• Support platform 110x110 cm
• Base

Dimension

Base: 110 cm x 110 cm x 150 cm | PC: 60 cm x 80 cm x 100 cm | Weight: 450kg | 

Type of System: IsoKinetic System monoarticular (knee)

Use Modality: Isokinetic Concentric/Eccentric - Isotonic - Isometric - CPM
Function: Soft Stop in Isokinetic and CPM
Sampling Frequency: From 100Hz to 500Hz
Max. Couple of IsoKinetic module: 450N/m
Angular Velocity: 400°/s 
Arm Type: Dynamic arm for a further accuracy in the measurements
Settings: Adjustable chair height (for limb dimensions), depth (for the seat)
Electricity Supply: 230 VAC, 50 Hz, 9 A
Power Consumption: 2KW
Conformity: Directive 93/42/EEC- Standard EN 60601-1
Guarantee: 12 Months

Assessment & Training Capabilities

• CPM: Continuous Passive Motion
• Isometric Training
• Flex Control


• Isotonic Training
• Iso-kinetic Training

Software

Isokinetic Mode

The isokinetic resistance mode allows the patient to maintain a constant speed throughout the movement. You can set:
• speed and maximum torque for concentric mode 360 ° / s - 450 Nm
• speed and maximum torque for eccentric mode 200 ° / s - 400 Nm 

Passive CPM mode

CPM mode of passive movement allows immediate intervention for all patients and in all phases of their rehabilitation. Patients can carry out the rehabilitation phase in CPM safely using the torque limitations, which can be set from 1 Nm.
If the torque limit is exceeded during an eccentric contraction, the system stops and, once back below the limit of established torque, the restart of the year is allowed. The passive speed can be adjusted between 1 ° / s and up to the 30 ° / s limit.

Isometric mode

Isometric mode is commonly used in the pre- and post-operative phase.

The ISOMOVE system provides for the use of this mode allowing optimal positioning in the arc of movement of 120 °.
The maximum isometric torque is set at 450 Nm.

Follow Us

Connect